top of page

NutriServe BOD Enhancer

NutriServe BOD Enhancer for Aeration tank, MBR, MBBR and SBR Tanks

NutriServe BOD Enhancer for Aeration tank, MBR, MBBR and SBR Tanks

Pack Size -1Kg

NutriServe BOD Enhancer artificially increases the inherent BOD load in wastewater, kickstarting the biological treatment process in a safe and controlled manner. Supercharging the metabolic activity of beneficial microorganisms in your wastewater treatment system. This results in faster organic matter breakdown and more efficient pollutant removal.

NutriServe BOD Enhancer artificially increases the inherent BOD load in wastewater, kickstarting the biological treatment process in a safe and controlled manner. Supercharging the metabolic activity of beneficial microorganisms in your wastewater treatment system. This results in faster organic matter breakdown and more efficient pollutant removal.


Category: BOD Enhancer, Increase BOD level


Description


NutriServe BOD Enhancer is a formulation for artificially increasing the inherent BOD load in an organically starved waste water stream. Microbes / Bacteria require a minimum BOD threshold for rapid multiplication & acclimatization during the commissioning of the wastewater treatment plant. Speed of plant commissioning is dependent upon how fast the existing baby microbes reach full grown stage in terms of age & acclimatization too. The multiplying microbes should reach full grown MLSS stage with a healthy MLSS to MLVSS ratio. When a particular wastewater (Sewage or effluent) is deficient in sufficient BOD load or experiencing low flowrates, at such times, sustaining the MLSS, multiplying them & commissioning a system becomes a challenge in itself.


Benefits of using BOD Enhancer


  1. Reduction in commissioning time of ETP & STP

  2. Ensures consistent unchanging supply of essential BOD required for generating & sustaining MLSS

  3. Rapid growth of MLSS with high MLVSS Content

  4. Powdered form, Easy to use and easy to store

  5. BOD Enhancer supplements useful bacteria within the ETP/STP

  6. Shock load stabilization



Area of application


Aerobic:

  1. Aeration tanks

  2. MBBR (Moving Bed Biofilm Reactor)

  3. Sequencing Batch Reactor(SBR)

  4. Membrane Bio Reactor(MBR)

  5. Rotating Biological Contactors(RBC)

  6. Trickling Filters


Anaerobic:

  1. Anaerobic Filter (AF)

  2. Upflow Anaerobic Sludge Blanket (UASB)

  3. Continous Stirred Tank Reactor (CSTR)


FAQ


Under which conditions BOD enhancer be used?

When BOD/COD ratio is less than the ideal ratio of 1:2. If the BOD level is below 1, BOD enhancer should be added to enhance BOD. This will rapidly increase BOD/COD multiply microorganism population.


How much BOD does 1kg BOD enhancer increase?

1 kg BOD enhancer gives 1.6kg BOD.


Does BOD enhancer affect water parameters?

No. Actually, it will improve water quality.

bottom of page