Pro Bac AE 100 & 200 Blue

PRO-BAC-AE-100 is a blend of essential Micronutrients that nourishes the essential bacteria within a wastewater or sewagetreatment system. By stimulating and strengthening these microbes, the product helps to increase the rate at which organic effluent can be broken down.

1. Pro Bac AE 100 :

  • Improves MLSS settling in the clarifier.
  • Increased BOD degradation by higher metabolism.
  • Increases capability for sustaining BOD shock loads.
  • Increases capability for sustaining Flow based shock loads.
  • Increases break down of complex compounds into simpler forms.

2. Pro Bac AE 200 – A energy drink for the microbes:

  • Improves MLSS settling in the clarifier.
  • Increase capability for sustaining BOD Shock Loads.
  • Increased BOD degradation by higher metabolism
  • Increase capability for sustaining flow based shock loads.
  • Increases break down of complex compounds into simpler forms.

1. Composition – ProBac AE200 is a water soluble proprietary formula­tion containing mixture of different micronutrients containing the following Magnesium sulphate, Cobalt Sulphate. Sodium Molybdate, Nickel sulphate, Copper Sulphate, MangeneseSulphate.

2. Dosage – General dosage is 5 to 15 mg/lit for general sewage
and “Healthy’ waste waters. Actual dosage applicable for ETP5 will vary depending on your specific waste waters.

3. Colour – Standard Colour of ProBac AE 200 is Blue.

4. Shelf Life – ProBac AE 200 is stable for minimum of 2 years when stored in cool and Dry Place.

How To Use

Take 100-200 Ltrs of H DPE/FRP/PP dosing Tank. Mix one day dose of ProBac with raw water and dose the solution by gravity/pumping. continuously, spread over 24 hours/ day. Place the dosing tank at the inlet end of biological tank. You can also dissolve ProBac in the storage tank prior to biological tank so that it mixes with raw effluent/ partially treated effluent before it is fed to biological tank.




Translate »