Pro Bac AE 200

No Magic!! Just Micronutrients…

Pro Bac AE 200 IS like an energy drink for the microbes!

Improves MLSS settling in the clarifier. Increase capability for sustaining BOD Shock Loads. Increased BOD degradation by higher metabolism Increase capability for sustaining flow based shock loads. Increases break down of complex compounds into simpler forms

Composition – ProBac AE200 is a water soluble proprietary formulation containing mixture of different micronutrients containing the following: Magnesium sulphate, Cobalt Sulphate, Sodium Molybdate, Nickel sulphate, Copper Sulphate, Manganese Sulphate.

Dosage – General dosage is 5 to 15 mg/lit for general sewage and “Healthy” waste waters. Actual dosage applicable for ETPs will vary depending on your specific waste waters.

Colour – Standard Colour of ProBac AE 200 is Blue.

Shelf Life – proBac AE 200 is stable for minimum of 2 years when stored in cool and Dry Place.


Take 100-200 Liters of HDPE/FIRP/PP dosing Tank. Mix one-day dose of ProBac with raw water and dose the solution by gravity/pumping, continuously, spread over 24 hours/ day. Place the dosing tank at the inlet end of

biological tank. You can also dissolve ProBac in the storage tank prior to biological tank so that it mixes with raw effluent/ partially treated effluent before it is fed to biological tank.

Translate »