.webp)
FOG Bioculture for Grease Trap and Drain Treatment
BactaServe FOG is a microbial formulation designed to break down fats, oils, grease and other organic waste in drains, grease traps and associated wastewater systems. It helps reduce organic build-up and unpleasant odours through biological degradation, supporting routine maintenance of drainage systems.
Supporting Grease Degradation and Drain Maintenance
Fats, oils and grease (FOG) can accumulate in kitchen drains, grease traps, pipes and leach drains, contributing to organic build-up and unpleasant odours. Regular maintenance helps manage these deposits and supports the effective operation of drainage and wastewater systems.
BactaServe FOG is a microbial formulation containing natural microbes that degrade oil, grease and organic waste. It is designed to help remove organic build-up from pipes, grease traps and leach drains while reducing associated odours.
Key Benefits of BactaServe FOG
BactaServe FOG supports biological grease management and organic waste breakdown in suitable drainage systems.
Oil and Grease Degradation: Supports the biological breakdown of oil and grease deposits.
Organic Waste Breakdown: Helps degrade organic waste accumulating in drainage systems.
Odour Reduction: Helps eliminate unpleasant odours associated with grease and organic build-up.
Pipe Maintenance: Helps remove organic deposits from pipes and drainage lines.
Grease Trap Treatment: Supports the management of accumulated grease and organic waste in grease traps.
Leach Drain Maintenance: Helps remove organic build-up from leach drains.
How BactaServe FOG Works
BactaServe FOG uses natural microbes capable of degrading oil, grease and organic waste. When applied to a suitable drainage system, these microorganisms support the biological breakdown of accumulated organic material.
This process helps manage deposits in pipes, grease traps and leach drains while addressing odours associated with organic waste accumulation. Regular application, using a dosage suited to the grease trap condition, supports ongoing maintenance.
Applications of BactaServe FOG
BactaServe FOG is intended for applications where grease and organic waste accumulate in drainage and wastewater systems.
Kitchen Drain Outlets: For treatment through kitchen drainage lines.
Grease Traps: Supports biological degradation of accumulated oil, grease and organic waste.
Pipes and Drainage Lines: Helps remove organic build-up from internal pipe surfaces.
Leach Drains: Supports the breakdown of organic deposits in leach drainage systems.
Wastewater Systems: Can be considered where oil, grease and organic waste contribute to odour and maintenance challenges.
Maintaining Grease Trap Performance
Grease traps collect fats, oils, grease and other organic residues before they enter downstream drainage systems. As these materials accumulate, they can contribute to organic build-up and unpleasant odours.
BactaServe FOG supports the biological degradation of accumulated grease and organic waste. Before the first application, the grease trap should be cleaned once. Subsequent treatment can help manage organic deposits and odours as part of a regular maintenance programme.
For effective application, the dosage should be adjusted according to the condition of the grease trap and the treatment requirements.
Dosage and Application Procedure
The dosage of BactaServe FOG depends on the condition of the grease trap and the application requirements. The recommended dosage may vary from 1 ppm to 10 ppm, depending on the existing conditions.
Initial Preparation: Clean the grease trap once before the first application of BactaServe FOG.
Preparation Ratio: Mix 1 kg of BactaServe FOG in 20 litres of feed water. For larger quantities, mix 2 kg in 40 litres of feed water.
Mixing: Mix the product thoroughly with the feed water.
Application Timing: Flush the prepared application through kitchen drain outlets at night with water.
Dosage Adjustment: Determine the required daily quantity based on wastewater volume, organic load and grease trap condition.
Important Application Considerations
Correct application helps support effective grease and organic waste management.
Initial grease trap cleaning: Clean the grease trap once before the first application.
Grease trap condition: Assess the amount of accumulated grease and organic material when determining the dosage.
Dosage range: Consider the recommended range of 1 ppm to 10 ppm according to the application conditions.
Application timing: Apply through kitchen drain outlets at night and flush with water.
Regular maintenance: Maintain a suitable dosing schedule according to the condition of the system and treatment requirements.
Why Choose BactaServe FOG?
BactaServe FOG is an application-specific microbial formulation designed for grease degradation and organic waste management in drainage systems.
Natural Microbial Formulation: Uses natural microbes to degrade oil, grease and organic waste.
Grease Trap Maintenance: Supports the breakdown of accumulated grease and organic deposits.
Odour Management: Helps reduce unpleasant odours associated with organic waste.
Multiple Applications: Suitable for consideration in pipes, kitchen drains, grease traps and leach drains.
Flexible Dosage: Allows the dosage to vary according to grease trap condition, within the stated application range.
BactaServe FOG can be considered for kitchen and wastewater drainage systems requiring biological support for grease degradation, organic build-up removal and odour management.