top of page

Types of Sewage Treatment Plant: Processes, Uses and How to Choose

3 days ago
6 min read
Types of sewage treatment plant showing multiple wastewater treatment tanks and processes.

Overview


  • The main types of sewage treatment plant include Activated Sludge Process (ASP), Moving Bed Biofilm Reactor (MBBR), Sequencing Batch Reactor (SBR), Membrane Bioreactor (MBR), Moving Bed Sequencing Batch Reactor and constructed wetlands.

  • Each STP treats sewage differently. Some use microorganisms suspended in water, while others use bacteria attached to plastic media or natural treatment beds.

  • The choice depends on sewage volume, available land, electricity supply, maintenance needs and treated water quality requirements.

  • In India, residential apartments, hotels, hospitals and commercial buildings use different sewage treatment technologies depending on their daily wastewater load.

  • Common STP problems include bad odour, poor settling, high BOD and equipment failures. The treatment method and daily operating conditions both affect these problems.

  • Understanding the different types of sewage treatment plant helps property managers and engineers select a system that suits their site.


Table of Contents


Introduction


There are several types of sewage treatment plant, including ASP, MBBR, SBR, MBR and constructed wetlands. Each uses a different sewage treatment process to remove pollutants before the water is discharged or reused.


For example, an apartment building may need a compact STP that can handle changes in sewage flow throughout the day. A large municipal treatment plant may have more land available but must treat a much greater volume of sewage.


So, which system should you choose?


The answer depends on how much sewage the site produces, how much space is available and what quality of treated water is required.


What Is an STP and What Are Its Types?


A sewage treatment plant (STP) removes contaminants from wastewater produced by toilets, bathrooms, kitchens and other domestic activities.


Most STPs use physical separation followed by biological sewage treatment. Some include filtration and disinfection before treated water is reused.


There is no single fixed number of STP types. Plants are classified according to their treatment technology, reactor design or biological process.


The following are some of the most commonly used systems.


1. Activated Sludge Process (ASP)


The activated sludge process uses microorganisms suspended in an aeration tank to break down biodegradable organic matter.


Air is supplied to maintain oxygen, and the treated mixture then enters a settling tank where sludge separates from water.


Part of the settled sludge returns to the aeration tank.


Common applications: Municipal sewage treatment and larger residential or institutional facilities.


Points to consider: ASP requires regular checks of aeration, sludge wasting and settling. Poor sludge control can affect treated water quality.


2. Moving Bed Biofilm Reactor (MBBR)


An MBBR sewage treatment plant uses small plastic carriers inside a treatment tank.


Microorganisms attach to these carriers and form a biofilm. As sewage passes through the tank, the microorganisms break down biodegradable organic matter.


Air or mechanical mixing keeps the carriers moving.


Common applications: Residential buildings, hotels and commercial facilities.


Points to consider: MBBR systems can provide substantial biological treatment within a relatively small reactor. However, they still require suitable aeration, downstream solids separation and regular maintenance.


3. Sequencing Batch Reactor (SBR)


An SBR treats sewage in batches rather than through a continuous flow of separate treatment tanks.


The same reactor usually carries out filling, biological treatment, settling and treated water withdrawal.


How does an SBR work?


  1. Sewage enters the reactor.

  2. Aeration and mixing support biological treatment.

  3. Mixing stops so solids can settle.

  4. Treated water is removed.

  5. Excess sludge is wasted as required.


Common applications: Apartments, institutions and municipal treatment facilities.


Points to consider: SBR systems depend on correctly timed operating cycles, functioning valves and suitable controls. Incoming flow may need equalisation.


4. Membrane Bioreactor (MBR)


An MBR combines biological treatment with membrane filtration.


The microorganisms break down biodegradable pollutants, while membranes separate treated water from suspended solids.


This can produce low-turbidity water suitable for further treatment and certain reuse applications.


Common applications: Sites with limited space or demanding treated water quality requirements.


Points to consider: Membranes require cleaning and maintenance. Energy use, membrane replacement and fouling control must be considered.


5. Moving Bed Sequencing Batch Reactor


This system combines moving biofilm carriers with batch treatment cycles.


Microorganisms attached to the carriers treat organic matter while the reactor follows scheduled treatment stages.


Common applications: Selected compact sewage treatment systems.


Points to consider: The design must account for carrier movement, solids separation and batch cycle control. Its suitability depends on the specific system rather than the technology name alone.


6. Constructed Wetlands


Constructed wetlands use planted beds, soil or gravel media and naturally occurring microorganisms to treat wastewater.


As water moves through the bed, physical separation and biological reactions remove some pollutants.


Common applications: Rural communities, institutions and sites with suitable land availability.


Points to consider: Wetlands generally require more land than compact mechanical systems. Treatment results depend on design, loading, climate and maintenance.


Comparison of Different Types of Sewage Treatment Plant


STP type

Main treatment method

Important consideration

ASP

Suspended microorganisms

Needs sludge settling and aeration control

MBBR

Microorganisms attached to carriers

Needs mixing and downstream solids removal

SBR

Biological treatment in batches

Requires cycle control

MBR

Biological treatment with membranes

Membrane cleaning and operating costs

Moving Bed SBR

Biofilm treatment with batch operation

Carrier and cycle management

Constructed wetland

Plants, media and microorganisms

Land requirement and loading limits


These sewage treatment plant types have different operating needs. A system that works well for a large municipal facility may not suit a small apartment building.


Types of STP in India: Which Systems Are Common?


In India, ASP, MBBR, SBR and MBR are among the technologies used for residential, commercial and municipal sewage treatment.


For example, a housing society may prefer a compact plant because space is limited. A municipal authority may consider larger treatment systems based on sewage flow, land and long-term operating costs.


However, plant selection must also consider the applicable discharge or reuse standards set by the relevant pollution control authority.


Which Type of Sewage Treatment Plant Is Best?


There is no single best STP for every site.


Before selecting a plant, check:


  • Daily sewage volume: How much wastewater enters the plant, including peak flow?

  • Available space: Is there enough land for the reactor and sludge handling?

  • Treated water use: Will the water be discharged or reused for flushing and gardening?

  • Operating requirements: Who will maintain the plant and monitor treatment quality?

  • Cost: What are the electricity, maintenance and sludge disposal requirements?


Which Type of STP Is Best for Residential Apartments?


MBBR, SBR and MBR systems may all be suitable for apartment buildings.


MBBR is often considered where compact biological treatment is needed. SBR may suit sites where batch operation can be managed properly. MBR may be considered when space is limited and high-quality treated water is required.


The final choice should follow sewage testing and a review of site conditions.


Why Do Different STP Types Face Treatment Problems?


Even a correctly designed STP can develop problems when operating conditions change.


Low oxygen can affect biological treatment. Poor sludge wasting can cause solids accumulation, while sudden increases in sewage flow may affect settling.


Bioculture products such as Amalgam Biotech's BactaServe STP are intended for sewage treatment applications.


However, adding microorganisms cannot replace proper aeration, equipment maintenance or sludge control.


Conclusion


The main types of sewage treatment plant differ in how they treat wastewater, how much space they need and how they are operated.


ASP, MBBR, SBR, MBR and constructed wetlands each have suitable applications.


Choosing an STP requires more than comparing equipment prices. Sewage volume, site conditions, treated water requirements and maintenance costs should guide the decision.



Frequently Asked Questions


1. How Many Types of STP Are There?

There is no fixed number. Common STP types include ASP, MBBR, SBR, MBR and constructed wetlands. Other systems and combinations are also used.


India uses several STP technologies, including ASP, MBBR, SBR, MBR and natural treatment systems. The choice depends on plant size, location and discharge requirements.


Common types include activated sludge plants, moving bed biofilm reactors, sequencing batch reactors, membrane bioreactors and constructed wetlands.


MBBR, SBR and MBR can be suitable for apartments. The choice depends on available space, daily sewage volume, treated water requirements and maintenance arrangements.


Start by measuring daily sewage flow and checking available space. Then compare treatment requirements, operating costs, sludge handling and maintenance needs before selecting the technology.


Choose the Right Biological Treatment Support for Your STP


Selecting the right sewage treatment technology is only part of maintaining reliable STP performance. Amalgam Biotech's BactaServe STP supports biological treatment in sewage treatment systems under suitable operating conditions. Strengthen microbial activity and support consistent treatment performance in your sewage treatment plant.




 
 
bottom of page